gallery/p

●EMI&EMS 測試附件週邊/ EMI&EMS Accessories

CISPR 22 ISN Four Balanced Pair Module

 

The circuit design meets the CISPR 22, figure D.3 schematic.

Due to this unique design,
the F-071115-1057-1 can be used for testing single balance pair, two balanced pair and four balance pair telecom
circuitry. The F-071115-1057-1 is equipped with D-Sub 25 female connector on the EUT side and a universal RJ socket
on the AE side. The Equipment Under Test (EUT) is connected to the TLISN by the LCL adapters.

CDN 0.15-230MHz,IEC/EN 61000-4-6 

Typ CDN 0.15 - 230 MHz, IEC 1000-4-6, EN 61000-4-6
L 801 M1 CDN Earth Conductor 240 V, 6 A
[Picture1] [Picture2]
L 801 M1 32 A CDN Earth Conductor 240 V, 32 A
L 801 M2 CDN Mains 2 leads, 16 A, L + N or L1 + L2, 240 V
[Picture1] [Picture2]
L 801 M2/10kHz CDN Mains 2 leads, 16 A, L + N or L1 + L2, 240 V, 10 kHz - 80 MHz
L 801 M2/50 CDN L1 + L2, 240 V, 50 A
L 801 M2/75 CDN L1 + L2, 240 V, 75 A
L 801 M3 CDN Mains 3 leads, 16 A, L + N + PE, 240 V
[Picture1] [Picture2]
L 801 M3/10kHz CDN Mains 3 leads, 16 A, L + N + PE, 240 V, 10 kHz - 80 MHz
L 801 M3 Delta CDN L1 + L2 + L3, 3 x 400 V, 16 A
L 801 M2/M3 CDN Mains 3 leads, 16 A, L + N + PE, switchable L + N, 240 V, can be used up to 300 MHz for CISPR 15 CDN-method.
L 801 M4 CDN L1 + L2 + L3 + PE, 3 x 400 V, 16 A
L 801 M4 Delta CDN L1 + L2 + L3 + N, 3 x 400 V, 16 A
L 801 M5 CDN Mains 5 leads, 16 A, L1+L2+L3+N+PE, 16 A, 3 x 230 / 400 V
L 801 AF 2 CDN Data 2 leads, can also be used for the CDN method up to 300 MHz acc. EN 55015.
L 801 AF 4 CDN Data 4 leads [Daten]
L 801 AF 8 CDN Data 8 leads
L 801 S1-50 CDN Coaxial 50 Ohm, BNC, N or SMA
L 801 S1-75 CDN Coaxial 75 Ohm, BNC-connector 75 Ohm
L 801 S4 CDN Data 2 twisted pairs screened, D-sub 9 female
[Data]
L 801 S8 CDN Data 8 leads screened, D-sub 9 female
L 801 S9 CDN Data 9 leads screened, D-sub 9 female
L 801 S15 CDN Data 15 leads screened, D-sub 15 female
L 801 S25 CDN Data 25 leads screened, D-sub 25 female
L 801 T2 CDN Balanced Lines [Data]
L 801 T4 CDN Balanced Lines
L 801 T8 CDN Balanced Lines
CR 100 150 Ohm to 50 Ohm Adaptor 0 - 1000 MHz, 1 W, N-female, 4 mm female
CR 100 A 150 Ohm to 50 Ohm Adaptor for CDN, 0 - 500 MHz, 4 W, BNC female, 4 mm female for CDN