●EMI&EMS 測試附件週邊/ EMI&EMS Accessories
CISPR 22 ISN Four Balanced Pair Module
The circuit design meets the CISPR 22, figure D.3 schematic.
Due to this unique design,
the F-071115-1057-1 can be used for testing single balance pair, two balanced pair and four balance pair telecom
circuitry. The F-071115-1057-1 is equipped with D-Sub 25 female connector on the EUT side and a universal RJ socket
on the AE side. The Equipment Under Test (EUT) is connected to the TLISN by the LCL adapters.
CDN 0.15-230MHz,IEC/EN 61000-4-6
Typ | CDN 0.15 - 230 MHz, IEC 1000-4-6, EN 61000-4-6 |
L 801 M1 | CDN Earth Conductor 240 V, 6 A [Picture1] [Picture2] |
L 801 M1 32 A | CDN Earth Conductor 240 V, 32 A |
L 801 M2 | CDN Mains 2 leads, 16 A, L + N or L1 + L2, 240 V [Picture1] [Picture2] |
L 801 M2/10kHz | CDN Mains 2 leads, 16 A, L + N or L1 + L2, 240 V, 10 kHz - 80 MHz |
L 801 M2/50 | CDN L1 + L2, 240 V, 50 A |
L 801 M2/75 | CDN L1 + L2, 240 V, 75 A |
L 801 M3 | CDN Mains 3 leads, 16 A, L + N + PE, 240 V [Picture1] [Picture2] |
L 801 M3/10kHz | CDN Mains 3 leads, 16 A, L + N + PE, 240 V, 10 kHz - 80 MHz |
L 801 M3 Delta | CDN L1 + L2 + L3, 3 x 400 V, 16 A |
L 801 M2/M3 | CDN Mains 3 leads, 16 A, L + N + PE, switchable L + N, 240 V, can be used up to 300 MHz for CISPR 15 CDN-method. |
L 801 M4 | CDN L1 + L2 + L3 + PE, 3 x 400 V, 16 A |
L 801 M4 Delta | CDN L1 + L2 + L3 + N, 3 x 400 V, 16 A |
L 801 M5 | CDN Mains 5 leads, 16 A, L1+L2+L3+N+PE, 16 A, 3 x 230 / 400 V |
L 801 AF 2 | CDN Data 2 leads, can also be used for the CDN method up to 300 MHz acc. EN 55015. |
L 801 AF 4 | CDN Data 4 leads [Daten] |
L 801 AF 8 | CDN Data 8 leads |
L 801 S1-50 | CDN Coaxial 50 Ohm, BNC, N or SMA |
L 801 S1-75 | CDN Coaxial 75 Ohm, BNC-connector 75 Ohm |
L 801 S4 | CDN Data 2 twisted pairs screened, D-sub 9 female [Data] |
L 801 S8 | CDN Data 8 leads screened, D-sub 9 female |
L 801 S9 | CDN Data 9 leads screened, D-sub 9 female |
L 801 S15 | CDN Data 15 leads screened, D-sub 15 female |
L 801 S25 | CDN Data 25 leads screened, D-sub 25 female |
L 801 T2 | CDN Balanced Lines [Data] |
L 801 T4 | CDN Balanced Lines |
L 801 T8 | CDN Balanced Lines |
CR 100 | 150 Ohm to 50 Ohm Adaptor 0 - 1000 MHz, 1 W, N-female, 4 mm female |
CR 100 A | 150 Ohm to 50 Ohm Adaptor for CDN, 0 - 500 MHz, 4 W, BNC female, 4 mm female for CDN |